You can face an issue of flat tyre anytime and anywhere, and it often happens when it is least expected. When you know how to drive a vehicle, it becomes extremely important and necessary to learn how to change a tyre. It is not just a handy trick, it is basic skills for every driver. Changing a tyre does not require great strength or mechanical skills: with the right approach and rolls, anyone can achieve the task and manage it well. Being prepared for such a situation can help you get saved from unnecessary stress and can also save you time.

Mostly roadside flat tyres are manageable without any assistance or mechanic help. It is recommended to park roadside safely before starting the process. Once you are at a secure place, gather essentials like jack, spare tyre, and wrench. Follow simple steps to get your vehicle moving again. Learning this skill helps in boosting your confidence while driving and be ready for any emergencies.

ALSO READ: Why Car Insurance Rates Go Up After An Accident: Step By Step Guide

What is Required for Changing a Flat Tyre?

1. Tools Required to Replace a Car Tyre

• To lift the vehicle high enough to remove the flat tyre there is a need for Jack.

• To tighten or loosen the wheel nuts there is a requirement of Wheel spanner/ Lug wrench.

• If your jack requires one for operation then jack handle is required.

• There is a need for a spare and extra tyre which is in good condition and inflated properly with air.

• Manual for instructions that can help car owners with the car. It helps in keeping you informed about where jack has to be placed, the nut size of your wheel, and what type of tyre your car has. It provides you with a proper guide so that you don’t make any mistake while changing the tyre.

2. Extra Items that you might need 

• When stuck during nighttime or in a situation with a low light flashlight can help you with visibility.

• To stabilise the jack on the ground which is uneven a flat wood board with measurement of around 2×6 inches can help a lot.

• To stop the vehicle from rolling while you are working on the flat tyre wheel wedges or bridge can help you a lot during such situations.

• A tyre pressure gauge is essential as it can help you to check the share tyre’s air pressure.

• To keep the dirt away and protect your hand gloves can be helpful.

• During bad weather a raincoat is important.

ALSO READ: Stopped By Traffic Police? Understand Your Rights, Fines, And Responsibilities

How to Change a Car Tyre: Step-by-Step Guide

It might seem tough when it comes to changing of the flat tyre, but it becomes a simple task once you know the process to replace the punctured tyre:

• Safe Spot: As soon as a flat tyre comes into your notice, lower down the speed and pull over to the safe side of the road.Make sure to turn on the to hazard lights to  alert other vehicles passing by.

• Handbrake and Wheel Wedges: Pull up the handbrake so the car stays still and doesn’t roll or move while you are changing the flat tyre. Put a wheel wedged into bricks, or any stone behind the tyres that are not flat and can act as a barrier. This helps in keeping the car safe and steady.

• Wheel Cover: if there is any wheel cover or hubcap, remove it before losing the nuts.

• Lug Nuts: To loosen the nuts lug wrench is used. Do not remove it, just loosen it a bit so that it gets easier for you to remove it later.

• Position the jack and lift the car: It is important to place the jack under the correct hack point and the car needs to be lifted up until the tyre is slushily off the ground. To get more stability a wooden board under the jack can be very helpful.

• Removal: Pull the flat tyre off the wheel frame after unscrewing the nuts completely.

• Spare tyre: Bolts and spare tyre needs to be properly aligned into place.

• Lower the car: After finishing the above mentioned process lower the car slowly, remove jack, and tighten the nuts in criss cross pattern. Replace the wheel cover if needed.

• Check tyre pressure: After following the above mentioned steps check the air pressure of the spare tyre and pack all the tools properly before driving away.

It is important to keep a spare tyre in your car and most importantly try learning how to change a tyre while you are learning driving, because why not?, it is going to benefit you and save you from any hassle in future.

 Read More Such Articles On AUTOXP: CLICK MORE